Mock-up by GDB Works for Coolers & More. Not a live site.
Coolers & More
A white walk-in cooler we built, with its refrigeration unit on topSkip tour ↓
Coolers & More, LLC ยท Portland

Keep your business cool.

Family-owned. 30 years building walk-in coolers and freezers. Scroll to take one apart.

Call (971) 386-859624/7 service
Scroll ↓
The door

The door does the most work.

It opens hundreds of times a day, so every part on it is heavy-duty.

  • Heavy chrome hinges Carry the door's weight for years
  • Locking latch Opens from the inside too, so no one gets shut in
  • Diamond-plate kick plate Takes carts, boots and dollies
  • Gasket + heater wire Seals tight; the heater keeps freezer doors from icing shut
  • Temperature display The box temperature at a glance
The walls

Foam, steel, locked tight.

Every wall is a sandwich: steel skin, thick foam, steel skin. The panels lock together, so we can build any size, and move it later.

  • Foam core Usually 4 inches thick. It keeps the cold in
  • Cam locks Pull each panel tight to the next
  • Embossed steel skins Easy to clean, hard to dent
  • Insulated floor Holds the cold in from below
The refrigeration

The whole system rides on top.

This box uses a top-mount unit: compressor, coil and fans in one piece on the roof. Nothing to run through your building.

  • Compressor Pumps the refrigerant around the loop
  • Condenser coil Lets the heat out
  • Condenser fan Pulls air through the coil
  • Controls Defrost timing and safety switches
Inside

Cold air, all the way around.

The coil in the ceiling pulls the heat out. Fans push cold air across the top, down the walls and back again.

  • Evaporator The cold side, built into the ceiling
  • Airflow Keep shelves a few inches off the walls so air can move
Built to fit

Your size. Your door. Your finish.

We build walk-ins to any size and height. Pick one to see it, then send it to us for a quote.

Get a quote for this box

3D model of a typical top-mount walk-in, drawn from one of our boxes. Drag to turn it.

Installation. Service. Solutions.

What we do.

Custom walk-ins

Walk-in coolers and freezers built or retrofitted to any size and height, with any door size.

  • Custom walk-in cooler and freezer panels
  • Custom door sizes and specifications
  • Doors, frames and hardware
  • Refrigeration systems and components
  • Evaporator coils and condensing units
  • Insulation, vapor barriers and seals
  • Gas line piping and connections
  • Electrical coordination and controls
  • Startup, testing and training

Built right. Built to last.

HVAC/R service, 24/7

Commercial refrigeration and commercial A/C, installed and serviced. All major brands.

  • Walk-in coolers and freezers
  • Ice machines
  • Reach-in coolers and freezers
  • Produce and refrigerated display cases
  • Commercial A/C units and systems
  • Diagnosing equipment issues
  • Component repair or replacement
  • Refrigerant leak detection and repair
  • Temperature and controls troubleshooting
  • Preventative maintenance
  • System performance optimization
  • Emergency service, 24/7

Not sure what is wrong? We inspect, test and explain it clearly.

Kitchen build-outs

Complete commercial kitchen installs, managed start to finish.

  • Kitchen design and layout help
  • Hoods and ventilation systems
  • Gas piping and connections
  • Ovens, fryers, grills, ranges, refrigerators, freezers, ice machines
  • Plumbing and utility connections
  • Electrical hookups and coordination
  • Stainless steel fabrication and custom work
  • Permit support and code compliance

One team, start to finish.

Hood cleaning and installs

A greasy hood is a fire risk and makes your whole system work harder. We clean on your schedule, any time you need it.

  • Scheduled hood cleaning
  • New hood installs (quote or bid)
  • Ventilation systems

Safety first, every time.

Concrete

Commercial concrete cutting, removal and install.

  • Concrete cutting
  • Concrete removal
  • Concrete install

One call for the slab work too.

Demo and removal

Out with the old.

  • Old walk-in removal
  • Commercial refrigeration removal
  • Kitchen equipment removal

We haul it, so you do not have to.

Refurbish, relocate, build

More life from good panels, and the construction around them.

  • Walk-in refurbishment
  • Walk-in relocation
  • Temperature-controlled rooms
  • Commercial construction: expansions, renovations, specialized spaces

Refurbished parts meet or beat the original maker's standards.

Real jobs, real photos

From our yard to your kitchen.

Walk-ins we built and sold this fall. Swipe for more.

A white walk-in cooler with its refrigeration unit on top at dusk
Set, wired and cold.
The same white walk-in from the corner: ribbed panels and corner trim
Clean lines, tight seams.
Inside an empty walk-in: white panel walls and the ceiling grille
Sealed and ready for product.
A black walk-in freezer box in front of the Coolers & More shop bay
Built in our yard.
A crew member strapping a walk-in freezer onto a flatbed trailer
Loaded by our crew.
A black walk-in freezer strapped down on the trailer
Strapped and on its way.
The long side of the black walk-in freezer
12 x 8 x 8 freezer, black finish.

In our shop

Kitchen equipment, coolers and freezers.

We are dealers for True and American Range, and we keep equipment in stock at the shop. Don't see it? We'll order it for you.

Equipment pictures are AI illustrations until our shop photos are in.

Ask about equipment

No delays. No setbacks.

From drawing
to inspection.

  1. DrawingsWe lay out the box to fit your space.
  2. Plan reviewEngineering and code checks.
  3. PermitsPermit support and code compliance.
  4. InstallPanels, doors, refrigeration, startup.
  5. Final inspectionTested, signed off, ready for product.

What does your cooler read?

Slide to your thermometer's reading.

Illustration of a walk-in cooler
Keep cold food at 41°F or colder.That is the food code line. Most walk-ins run a few degrees under it.

Quality installation. Reliable service. Maximum performance.

How we work.

Our mission: cold storage, refrigeration and construction that help your business run efficiently, safely and profitably. We refurbish and recycle where we can, and hold every job to a high standard.

Looks as good as it runs
Clean finishes, straight trim and tight panel lines.
Keeps panels out of landfills
Careful refurbishment gets the most life from good insulated panels.
Holds temperature
Airtight seals and tuned refrigeration cut utility bills.
Priced for your bottom line
Top-level craftsmanship at a price that works for a business.
Integrity in every install
From king valves to compressors, reused parts meet or beat original specs.

Questions

Asked a lot.

Who installs walk-in coolers and freezers in Portland, Oregon?
Coolers & More, LLC designs, installs, refurbishes and relocates walk-in coolers and freezers. Family-owned, 30 years of experience. 5242 NE Columbia Blvd, Portland, OR 97217, (971) 386-8596.
Is there 24/7 commercial refrigeration repair in Portland?
Yes. Coolers & More, LLC takes service calls 24/7: Tony (971-285-2707) or Aiden (971-386-8596). All major brands and systems.
Who does commercial kitchen build-outs in Portland?
Coolers & More, LLC builds complete commercial kitchens: design, hoods and ventilation, gas piping, equipment, plumbing, electrical, stainless fabrication and permits.
Can a walk-in cooler be moved or refurbished?
Yes. Coolers & More, LLC relocates and refurbishes walk-ins, reusing good insulated panels so they stay out of landfills.
Where can I buy True or American Range equipment in Portland?
Coolers & More, LLC is a dealer for True and American Range, keeps commercial kitchen equipment, coolers and freezers in stock at the shop, and orders what you need.
Who does commercial hood cleaning in Portland?
Coolers & More, LLC cleans commercial kitchen hoods on your schedule and installs new hoods. Call to book or ask for a bid.
Can you build a walk-in to an odd size or with a custom door?
Yes. We build and retrofit walk-in coolers and freezers to any size and height, with custom door sizes.
Do you remove old walk-ins and equipment?
Yes. Coolers & More, LLC handles demo and removal of old walk-ins, commercial refrigeration and kitchen equipment, plus commercial concrete cutting, removal and install.
Do you help with permits for a walk-in?
Yes. We handle drawings, plan review, permit support, install and final inspection.

Get a quote, bid or service call

What do you need?

Down right now? Call (971) 386-8596, 24/7.

Let's keep your business cool and running

Call the team.

5242 NE Columbia Blvd, Portland, OR 97217

(971) 386-8596 · CoolersAndMore@gmail.com